Descrizione
REGOLATORE CAR SPAZZOLE 60Ah
WATERPROOF QUICRUN 1060
1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank with BRUSHED motor
1 Features
1.1 Water-proof and dust-proof, suitable for all-weather condition races.
1.2 Small size with built-in capacitor module.
1.3 Three running modes: Fwd/Br, Fwd/Rev/Br and Fwd/Rev, fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
1.4 Great current endurance capability.
1.5 Great built-in BEC output capacity.
1.6 Automatic throttle range calibration, easy to use.
1.7 Easy to set the ESC parameters with jumpers.
1.8 Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
2 Specifications
Model
Wp-1625-BRUSHED
Wp-1060-BRUSHED
WP-860-DUAL-BRUSHED
Fwd. Cont. / Peak Current
Rev. Cont. / Peak Current
25A/100A
25A/100A
60A/360A
30A/180A
60A/360A
30A/180A
Voltage Range
2-3S Lipo or 5-9 NiMH
2-4S Lipo or 5-12 NiMH
Cars Applicable
1/18 &1/16: Touring Car, Buggy, Monster, Truggy
1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
1/8: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
Motor Limit *
2S Lipo or 6 NiMH
280?370 or 380 Size Motor
RPM<30000 @7.2V
540 or 550 Size Motor: =12T
Or RPM<30000 @7.2V
540, 550, 775 Size Motor: =12T
Or RPM<30000 @7.2V
3S Lipo or 9 NiMH
280?370 or 380 Size Motor
RPM<20000 @7.2V
540 or 550 Size Motor: =18T
Or RPM< 20000 @7.2V
540, 550, 775 Size Motor: =18T
Or RPM<20000 @7.2V
4S Lipo or 12 NiMH
Not Available
540, 550, 775 Size Motor: =24T
Or RPM<15000 @7.2V
Resistance
Fwd 0.003O, Rev 0.003O
Fwd 0.001O, Rev 0.002O
Fwd 0.001O, Rev 0.002O
BEC Output
1A/5V (Linear Mode)
2A/5V (Linear Mode)
3A/5V (Switch Mode)
PWM Frequency
1KHz
Dimension / Weight
34*24*14 / 23.5g
36.5*32*18 / 39g
46.5*34*28.5 / Not Available
Cooling Fan
Without cooling fan
Cooling fan works with 2-3S Lipo
Running Modes
Forward/Reverse/Brake
Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
*Note: WP-860-DUAL-BRUSHED has two outputs to drive 2 motors. When driving 2 motors simultaneously, the Turns of the motors need to be increased.
